flasher 2 led barebones

 
alternate layout (see below)

This layout is simpler than the main layout, but you have to make sure that the transistors and the capacitors are in place opposite to each other.

 Posted by at 3:49 am

  2 Responses to “flasher 2 led barebones”

  1. Hi I wondered why there is a link to both terminals of the leds.

    Regards Denis

    • Hi. The orange wires you see aren’t actually connecting both LED terminals. They are a pathway connecting the 10K resistors to the anode of each LED.

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>